How to Add Comfortable Handles to Crochet Hooks

I ran across a video tutorial on how to add polymer clay handles to crochet hooks on Carol Ventura's Tapestry Crochet Web site. The handles help with the tight stitches required with tapestry crochet, but also eases the cramping and slipping I was experiencing with a plain hook. I even bought a set of bamboo-handled aluminum hooks, which work great, but they didn't come in the smaller sizes that I use for thread or tapestry crochet.

I thought you'd like to see how I've improved (in my opinion) Carol's technique. Carol inserts the bare hooks into a roll of clay. I've added some texture to the handles before inserting into the clay to allow for a more secure fit.

To document the process I used, I started with two hooks: an aluminum size K and steel size 1:

I used some glue meant to bond to metal (Liquid Nails is the brand I used, I'm sure there are others) and a short piece of #10 crochet thread. I didn't measure the thread, but you can see from the picture below, I didn't use much:

Lightly coat the handle up to the flat thumb rest with the glue and wrap the thread down and back the handle, leaving quite a bit of space between the wraps. You can go further, covering up the thumb rest, but you'll have to mark the hook size on the handle. Here are the hooks drying after coating with glue and wrapping with the thread (it only takes a few minutes to set up):

When the glue is wet, don't lay the hook down because it will stick to whatever you lay it on. If you use your fingers to spread the glue, be sure to wash off the glue immediately, because it really sticks quickly.

I added the polymer clay in the colors Gold and Burnt Umber to give the handles a wood-like look. You can choose your favorite colors. I've seen the handles with a lot more clay than I used, you can make the handles much fatter than these. Mine were made for my comfort. Be sure to squeeze the clay securely around the handle so the clay doesn't have any gaps. Here mine are ready for the oven:

Bake in the oven according to the instructions provided with the clay, and you've got some nice comfortably-handled hooks. I would have added another picture of the hooks after they came out of the oven, but they look the same as they did when they went in. They're nice and hard.

The pictures above have links to the larger versions, if you need more detail.

The clay I used comes in 2 ounce (56 gram) packets. Use your imagination to combine and mix colors to your taste.

I'm loving mine!

Hat for Gift

I just finished this hat. I made it for my son-in-law's sister's 2-year-old son. He may have to grow into it.

Added "Wood" Handles to some crochet hooks

I found these instructions (which includes a video) on adding polymer clay handles to crochet hooks. This eases to strain on my old hands for doing some tight stitches required for tapestry crochet and some other special stitches with smaller hooks.

I think the effect worked well - I used gold and burnt umber colored polymer clay. I'll be converting the rest of my metal hooks with the same method soon.

Lacy Crochet Earrings

I've had numerous requests for the pattern for these earrings, so I created a free download. Just go to the pattern in my Lulu store and click "Download Now".

Enjoy!

San Diego County Fair Ribbons

I picked up my entries from the San Diego County Fair today, so I thought I'd gather them all together for a group shot with their ribbons.

On the left is the red cabled hat with brim (1st place).
The hat on the right is the one made from plastic bags made into PLARN (PLastic yARN) which came in 2nd place in the Recycled Wearable Art contest.

The two ribbons in the middle are for the afghan in the background (3rd place) and the crochet speed contest I entered (2nd place). I'm very pleased with my first attempt at entries in the Fair. The afghan and both hats are my own design, which made the wins even sweeter.

Recycled Plastic Bag Hat

I finally got around to taking a picture of my prize-winning hat.

I added a crocheted sweat-band of cotton thread for wearability.

This is the second-place finisher in the "Hat" category of "Recycled Wearable Art" at the San Diego County Fair, mentioned in an earlier post. Needless to say, I'm very proud of my first entries in the Fair.

Another Day at the Fair, another ribbon

We went to the San Diego County Fair again today. This time it was for another of the Fair's "One Day Contests". It's pretty cool - if you bring the entry form (and your entry, of course) you can get into the Fair for free! Today (July 1st) the contest was "Recycled Wearable Art". When I saw "recycled", I immediately thought of my tote made from recycled plastic grocery bags. Since the contest was for "wearable", I decided to crochet a hat out of the PLARN (PLastic yARN! A plastic hat didn't sound great, so I also decided to make a sweat band out of cotton thread. The contest rules specified that 80% of the article must be made from recycled material, so making only the sweat band from new material seemed acceptable.

OK - I'm rambling...we got there, I entered, and won 2nd place!

First place in the same category (Hat) was more of a head decoration than a hat, but I don't want to sound like a sore looser. I'm very excited about my 2nd place ribbon. I don't have a picture of it yet, but I probably will get one up tomorrow! Come back and see!